MMS drinking water filter filter head
MMS drinking water filter filter head
MMS drinking water filter filter head
MMS drinking water filter filter head

MMS drinking water filter filter head

2002
IN STOCK!
€159.00

€159.00 Stk / pcs

Tax included

Replacement filter head (Gen. 3) for our drinking water filter

Innovative 3-stage filter system

Best possible value for money

Easy installation thanks to pre-assembled, ready-to-connect filter head
100% vegan (contains no animal products)
Highest water quality and pure, revitalising taste

📦 Only €79.00 (tax incl.) left until free shipping!

Product Details

The ready-to-connect filter head - the basis of our filter system

Our MMS water filter system consists of this MMS drinking water filter head and replaceable cartridges. When assembled, both parts almost always fit under the kitchen sink. The filter system is simply installed in the cold water line between the cold water wall connection and the tap. While the filter head remains connected, the cartridges can be changed regularly.

To ensure consistent drinking water quality, the filter cartridge should be changed every 12 months or after 11,200 litres. The specified performance and capacity depend on the respective water quality and local water pressure and may vary. If, for example, the flow rate has decreased significantly, the filter capacity has been reached and the cartridge needs to be replaced. The old cartridge can be disposed of in the household waste. Subject to changes and errors. For further information about the design and functionality of our 3-stage MMS water filter, click on the following buttons.

Contents:

MMS drinking water filter filter head:
1x Pre-assembled filter head with wall bracket
2x Hose with backflow preventer
1x Multilingual installation instructions with mounting template
1x Screw set for wall bracket

Environmentally friendly:

The MMS drinking water filter head is very environmentally friendly in several respects. It consumes no electricity, requires no chemicals, produces no waste water (unlike reverse osmosis systems, for example) and does not require any time-consuming descaling. In addition, its capacity is more than twice that of conventional filters on the market, resulting in more than 50% less waste and lower transport costs and emissions per year.

The activated carbon block is made exclusively from coconut shells, a renewable raw material.

Technical data & installation dimensions

Min. flow rate: 4.5 l/min at 7 bar (with new cartridge)
Max. pressure: 8.0 bar
Temperature: min. 3 °C - max. 38 °C
Filter capacity: 11,200 litres or max. 1 year (whichever comes first)
Filter head: 3/8" with wall bracket, 2x 50 cm hoses (3/8‘), with backflow preventer
Connection: 3/8’
Installation dimensions of the complete set: 390 mm x 95 mm x 95 mm
(can be installed upright or horizontally)

TARIC No. 84212100

Important note:

Compliance:
EU Regulation 10/2011, European Directive 98/83/CE, DM 25/2012, DVGW (W543), KTW-A, W270. Our filter fully complies with EU requirements for materials that come into contact with food and drinking water.

Please note: The MMS drinking water filter set requires regular periodic maintenance! To ensure consistent drinking water quality, the MMS drinking water filter head should be replaced every 12 months or after 11,200 litres. The specified performance and capacity depend on the respective water quality and local water pressure and may vary. If the flow rate has decreased significantly, the filter capacity has been reached and the cartridge needs to be replaced. The old cartridge can be disposed of in household waste. Subject to changes and errors.

Disclaimer:

Installation is quick and easy. However, for insurance reasons, we recommend that the initial installation be carried out by a tradesman or specialist! The manufacturer is not liable for damage or consequential damage resulting from improper installation or modification! Annual filter changes can then be carried out without the need for a specialist.

ATTENTION: The triangles on the top of the filter head indicate the direction of water flow. Failure to observe this may result in damage to the filter!

GPSR compliance – EU product safety

Manufacturer information and responsible person in the EU:

AQUARIUS pro life (CY.) Ltd.

Lordou Vyronos 61-63,

6023 Larnaca, Cyprus

service@aquarius-prolife.com

Telephone: +49 221 97580887

For further information, please download our product information sheet.

Please note: You are only ordering a pre-assembled filter head - NOT a complete set!

(conductance, pH value, lime, mineral content, etc.)

MMS drinking water filter filter head – product review

Assembly instructions
Changing the cartridge
Other customers also bought: